|
|
 |
Bellhousings are available in 7-1/2, 8-1/8 and 8-5/8 depths. When ordering, please specify block and transmission type. For a printable version of this price sheet, CLICK HERE.
Steel Bellhousing Only, No Starter Pocket:
Includes bellhousing blank with 3.150 hole and drilling of block pattern. Inspection holes, liner or crosshaft holes are NOT included.
|
$660.00 |
Steel Bellhousing and Liner, No Starter Pocket:
Same as above plus Liner and Crosshaft Holes. Transmission pattern holes NOT included.
|
$925.00 |
Steel Bellhousing with Inspection Holes, No Starter Pocket:
Same as above plus Transmission Pattern Holes, Inspection Hole and Adjuster Slot with Covers.
|
$1175.00 |
6.1 Steel Bellhousing with Inspection Holes and Starter Pocket:
Complete bellhousing unit includes Block and Transmission Patterns, Liner, Crosshaft Holes, Inspection Hole, Adjuster Slot with Covers, Starter Pocket and Dust Tube (if applicable).
|
$1275.00 |
6.1 Aluminum Bellhousing with Inspection Holes and Starter Pocket:
Complete bellhousing unit includes Block and Transmission Patterns, Liner, Crosshaft Holes, Inspection Hole, Adjuster Slot with Covers, Starter Pocket and Dust Tube (if applicable).
|
$1975.00 |
6.1 Aluminum Small Diameter Bellhousing with Inspection Holes and Starter Pocket:
Complete bellhousing unit fot 142 tooth and smaller flywheel includes Block and Transmission Patterns, Liner, Crosshaft Holes, Inspection Hole, Adjuster Slot with Covers, Starter Pocket and Dust Tube (if applicable).
|
$1975.00 |
6.2 Steel Bellhousing with Inspection Holes, No Starter Pocket:
Bellhousing unit includes Block and Transmission Patterns, Liner, Crosshaft Holes, Inspection Hole, Adjuster Slot with Covers and Dust Tube (if applicable). Also includes 3/4" tabs and bushings installed with current SFI 6.2 bolt upgrade.
|
$1375.00 |
6.3 Aluminum Bellhousing with Inspection Holes and Starter Pocket:
Bellhousing unit includes Block and Transmission Patterns, Liner, Crosshaft Holes, Inspection Hole, Adjuster Slot with Covers, Starter Pocket and Dust Tube (if applicable). Also includes 1/2" tabs and bushings installed with current SFI 6.3 bolt upgrade.
|
$1975.00 |
6.3 Steel Bellhousing with Inspection Holes and Starter Pocket:
Bellhousing unit includes Block and Transmission Patterns, Liner, Crosshaft Holes, Inspection Hole, Adjuster Slot with Covers, Starter Pocket and Dust Tube (if applicable). Also includes 1/2" tabs and bushings installed with current SFI 6.3 bolt upgrade.
|
$1375.00 |
Steel Import Front Wheel Drive:
Bellhousing unit includes Block and Transmission Patterns and all necessary openings required.
|
$2500.00 |
Steel Small Diameter Import:
Bellhousing unit includes Block and Transmission Patterns, Crosshaft or Fork Opening, Adjuster Slot and Covers. Available in 6-1/2 or 8-1/8 depths.
|
$1600.00 |
Option 1: Starter Pocket (6.1 & 6.3 only):
Install starter pocket per customer specifications and modify liner
|
$200.00 |
Option 2: Crosshaft Assembly with Computer Pick-Up:
Includes crosshaft, candlestick with computer pick-up provision, fork, crosshaft bung and hardware.
|
$368.75 |
Option 3: Throwout Bearing Assembly:
Includes throw-out bearing, bearing collar and retainer spring.
|
$125.00 |
Option 4: Dust Tube:
Drill 1-1/2" hole in bellhousing with 2-1/2" long tube welded in place.
|
$50.00 |
Recertification Charge:
(inspection only, no repair time): |
$75.00 |
| Cleaning Charge: |
$45.00 |
Option 5: 6.2 Tabs:
3/4" (SFI 6.2) tabs without studs and nuts
|
$250.00 |
| Option 6: 6.2 Bolt Upgrade: |
$115.00 |
| Option 7: 6.3 Bolt Upgrade: |
$115.00 |
Option 8: 6.3 Bushings:
1/2" (SFI 6.3) bushings without tabs (Chevrolet & Large Flange Bellhousings)
|
$95.00 |
| Misc. Additional Labor: |
$60.00/hr |
| Adjuster Slot with Cover (includes slot): |
$150.00 |
| Liner Only: |
$145.00 |
| Crosshaft: |
$73.50 |
| Candlestick with Computer Pick-up: |
$140.00 |
| Crosshaft Bung: |
$26.00 |
| 1/2" Studs & Nuts: |
$125.13 |
| 3/4" Studs & Nuts: |
$126.76 |
| Short Bearing Retainer Collar (5600): |
$63.00 |
| Medium Bearing Retainer Collar (5620): |
$69.70 |
| Long Bearing Retainer Collar (5630): |
$75.90 |
| Special Order Bearing retainer (5630SP): |
$175.00 |
Cleaning of bellhousing
|
|
Repair of bad threads
|
|
Unsticking of liner (difficult disassembly)
|
|
Remove & reinstall tabs
|
|
Prices subject to change without notice. Call for current pricing before placing order: 765.447.2292
BACK TO TOP
|
|
|
|
